Location Search Function - LG VR6260 Série Guide D'utilisation

LOCATION SEARCH FUNCTION

The Robot Cleaner remembers its location while cleaning.
If the user moves the Robot Cleaner while it is operating, it will search for the location it was moved from
by using its navigational location search function before continuing to clean.
※ The navigating function will be activated after the Robot
Cleaner adequately recognizes the cleaning environment.
Manual Relocation.
1. Locate the Robot Cleaner near the location where it was
originally moved from.
※ The location search is more effective when the Robot
Cleaner is closer to the location where it was moved from.
※ If it is moved from its original cleaning position by more
than 1 m, it becomes diffi cult for the Robot Cleaner to
search for it's previous location.
2. Press the START/STOP button on the Robot Cleaner or START button on the remote controller.
Robot Cleaner will then start the location search function along with an audio guide.
※ When the location search is successfully completed, it will continue cleaning from where it was moved.
If the location search fails, it will start again from the beginning.
Location of incident
Tip
• When the power is turned off after the location search function is set, the location search function will be
canceled.
• Location search will be more effective when the Robot Cleaner is closer to the location where it was moved from.
26
To improve its accuracy, do not
stand near the HOM-BOT when it
Zigzag
is in location search mode.
When the location search function
is activated, the cleaning mode of
the status indicator will fl ash
Change location
1 m
Location of incident
1 m
Zigzag