Q. ADJUSTING THE DIGITAL
CLOCK
1. Turn the key to "ON".
2. Push and hold the "SELECT" button
(1) and "RESET" button (2) for at least
three seconds to enter the Select
mode.
• The transmission must be in neutral to
change settings in this mode.
• Shifting the transmission in gear will con-
firm all settings made in this mode, and
the display will change to the Normal
mode.
1
2
3. Adjust:
• digital clock (1)
1
a. Push the "SELECT" button to highlight
"Display", then push the "RESET" but-
ton.
b. Push the "RESET" button and the hour
digits start flashing.
c. Push the "SELECT" button to incre-
ment the hours.
d. Push the "RESET" button, and the
minute digits starts flashing.
e. Push the "SELECT" button to incre-
ment the minutes.
f.
Push the "RESET" button to start the
clock.
g. Push the "RESET" button again to re-
turn to the previous menu or push the
"SELECT" button to scroll to "All reset".
-16-