Additional Functions - Progress PHN1320 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

22 progress
2. Turn the knob for the temperature to a
temperature.
The temperature indicator comes on
while the temperature in the appliance
increases.
Oven Functions
Oven function
OFF position
Fan Cooking
Conventional Cook-
ing
Bottom Heat
Turbo Grilling
Grilling
Defrost
Knobs for the hob
With the knobs for the hob you operate
the hob that you installed with the
oven. For more information about the
hob, refer to the hob user manual.
Important! You must read the "Safety
information" chapter in the hob user
manual.
Heat settings
Knob
0
Off position
Heat settings
1 - 9
(1 = lowest heat setting, 9 =
highest heat setting)

ADDITIONAL FUNCTIONS

Cooling fan
When the appliance operates, the cooling
fan activates automatically to keep the sur-
faces of the appliance cool. If you deacti-
vate the appliance, the cooling fan stops.
Safety thermostat
Incorrect operation of the appliance or de-
fective components can cause dangerous
To roast or roast and bake food with the same cooking temperature,
on more than one shelf, without flavour transference.
To bake and roast on one oven level. The top and bottom heating el-
ements operate at the same time.
To bake cakes with crispy or crusty bottom. Only the bottom heating
To cook large pieces of meat. The grill element and the oven fan op-
erate one after the other and circulate hot air around the food.
To grill flat food items in small quantities in the middle of the shelf. To
Function
3. To deactivate the appliance, turn the
knob for the oven functions and the
knob for the temperature to the Off po-
sition.
Application
The appliance is OFF.
element operates.
make toast.
Thaws frozen food.
1. Turn the knob to a necessary heat set-
ting.
2. To complete the cooking process, turn
the knob to the off position.
Using the double zone (if applicable)
Caution! To activate the double zone,
turn the knob clockwise. Do not turn it
through the stop position.
1. Turn the knob clockwise to position 9.
2. Turn the knob slowly to the symbol
until you can hear a click.
The two cooking zones are on.
3. To set the necessary heat setting refer
to "Heat settings".
overheating. To prevent this, the oven has a
safety thermostat which interrupts the pow-
er supply. The oven activates again auto-
matically when the temperature drops.

Publicité

Table des Matières
loading

Table des Matières