Using The Patient Programmer To Activate A New Group - Medtronic DBS Patient programmer Manuel D'utilisation

Using the patient programmer to
activate a new group
If you brought your patient programmer to the
MRI appointment, you can activate the new
group before your MRI scan and outside of
the MRI scanner (magnet) room. This will
allow you to keep therapy on during your MRI
scan.
For instructions on activating a new group, go
to "Selecting a new group" on page 75.
During the MRI scan, keep therapy on, but do
not return therapy to your original group
setting.
Caution: Do not return therapy to your
original group setting before your MRI
scan. Returning therapy to your original
group setting could increase the potential
for unintended stimulation during the
scan.
After the MRI scan and outside of the MRI
scanner (magnet) room, you can return
therapy to your original group setting using
37642 2015-04 English
93