Medtronic DBS Patient programmer Manuel D'utilisation page 72

1. Synchronize the patient programmer and
neurostimulator.
a. Hold the patient programmer (or
b. Press the Check
2. Press the down
Navigator key to move the selection box
to the Parameter row (Figure 3.1).
Activa PC and RC models
Figure
3. Press the Selection key directly under the
displayed setting you want to adjust
(Figure 3.2).
72
English 37642 2015-04
antenna) directly over your
neurostimulator with the screen facing
outward.
screen appears.
Parameter row
3.1 Parameter row for Activa PC, RC,
and SC models.
key. The Therapy
arrow on the
Activa SC models