How To Use This Guide - Medtronic Guardian Connect Manuel D'utilisation Et D'applications

How to use this guide

The following table describes terms and conventions used in this guide.
Conven- Description
tion
Toggle Indicates that the same feature on the screen can be used to switch between two op-
tions. For example, "Toggle an alert on" means that you slide a switch right to turn on
an alert. To turn it off, you need to slide the same switch left.
Bold Indicates an item on the screen that you select with your finger or tap to open.
A shorthand to indicate a series of selections you make on the screen. For example,
>
Alert Settings > Rate Alerts means that you need to tap Alert Settings, and then on
the next screen tap Rate Alerts.
Note Provides additional helpful information.
CAUTION Notifies you of a potential hazard which, if not avoided, may result in minor or moderate
injury or damage to the equipment.
WARNING Notifies you of a potential hazard which, if not avoided, could result in death or serious
injury. It may also describe potential serious adverse reactions and safety hazards.
Guardian Connect app setup
When you open Guardian Connect for the first time, the app walks you through the
setup process. Simply follow the instructions on your screen. For more information,
see your welcome card.
Pairing your transmitter
Follow the instructions on your screen to pair your transmitter to your mobile device.
New sensor setup
Follow the instructions in the user guide for inserting the sensor. Then follow the on-
screen instructions to complete the sensor start up.
Note: You must connect your transmitter to your sensor before completing set up.
For details on reconnecting an existing sensor, see Reconnecting the existing
sensor, on page 22.
Inserting the sensor
Refer to your serter user guide for instructions on how to insert the sensor.
Connecting the transmitter to the sensor
Refer to your transmitter user guide for instructions on how to connect the transmitter
to the sensor.
-3-