Medtronic DBS Patient programmer Manuel D'utilisation page 127

Table 6.4 Troubleshooting problems
Problems
Patient
programmer is
unresponsive
The display screen
is blank when you
press a key.
Dropped patient
programmer
Your patient
programmer falls off
a cabinet or table.
(continued)
Causes and actions
The patient programmer
batteries are depleted.
Replace the patient
programmer batteries (see
page 130).
The patient programmer
batteries are in backwards.
Check the battery polarity
and reinstall the patient
programmer batteries (see
page 130).
The patient programmer is
designed to withstand a short
drop to a hard surface and still
operate normally, even if the
case is chipped or nicked.
Try the patient programmer;
it should work.
37642 2015-04 English
127