Medtronic DBS Patient programmer Manuel D'utilisation page 126

Problems
No therapy
You cannot notice
your therapy but you
think that therapy
should be on.
126
English 37642 2015-04
Table 6.4 Troubleshooting problems
(continued)
Causes and actions
Therapy is off.
Use your patient programmer
to turn your therapy on (see
page 46).
The amplitude setting for the
active group is set too low to
feel. (The effect of the
amplitude setting may take up
to 10 minutes or more to
notice.)
If you do not feel the desired
effect from a change in
amplitude, call your doctor.
If your patient programmer is
using Advanced mode, you can
try the following before calling
your doctor.
Use your patient programmer
to increase the amplitude for
one or both sides of your
body (see page 71).