Medtronic DBS Patient programmer Manuel D'utilisation page 119

Table 6.3 Information screens (continued)
Screen
Poor communication
Description and action
The patient programmer
attempted to communicate with
the neurostimulator, but
communication was
unsuccessful.
For patients with two
neurostimulators, you may have
attempted to synchronize with
another neurostimulator without
first turning the patient
programmer off.
Reposition the patient
programmer over the
neurostimulator with the
screen facing outward and
try communication again.
If using the detachable
antenna, check that the
antenna is connected
properly, reposition the
antenna and try
communication again.
Press any arrow on the
Navigator key to clear the
screen.
37642 2015-04 English
119