Promac SY-315 Mode D'emploi page 10

- Install the pump system (1A) in the machine stand, with
the motor (X) facing in.
- Attach the L-beam (H) with 4 bolts M8x25.
- Connect the return hose (Y) to the machine base (1B)
and make sure it flows into the filter (Z).
- Attach the rear cover (1C) with 4 screws (1D):
SY-315 / SY-315L
- Attach the small splash guard (1E) in the front of the
machine base, using 2 screws M6x16 (1F).
Make sure it does not interfere with the machine vise
- Place the large splash guard (1G) to the rear of the
machine base. It can be positioned as needed.
10