Service Menu - Minebea Intec Signum 2 Notice D'installation

Service Menu

Purpose
The service menu contains additional
configuration options in the operating
menu (Setup) that are only available
when the "Service" mode is active.
The service menu must be activated to
enable the main calibration/adjustment
operations affecting the display and
control unit and the connected
weighing platform.
When the service mode is active, an "S"
is shown in the upper right-hand corner
of the display. To deactivate the service
mode, switch the display and control
unit off and then on again.
10
Signum Option A15
The following menu items are appended
to the "Date" (DATE) and "Password"
(CODE) menu items:
– S-DATE: Date of service
(enter the next scheduled service date)
– MEM-NO: Memory number
(enter a transaction number for an
external Alibi memory)
– SER-NO: Display and control unit serial
number
– model: Model designation
(enter the device serial number)