Handling - Gaspardo PA2 Manuel D'emploi Et Entretien

3.2 HANDLING

If the equipment is to be moved, it is necessary to raise each part and hook it onto the respective mountings shown in (Fig. 5) with
hoisting apparatus of suitable lifting capacity. As this operation is dangerous, it must be carried out by trained, responsible personnel.
The machine weight is shown on the identification label (Fig. 1). The mass of the equipment is shown in the Technical Data table of the
user and maintenance booklet and is determined by the sum of the weight and the load shown in the table.
Stretch the cable to level the machine. The hooking points are shown by the graphic "hook" symbol (14, Fig. 2).
• Packaging materials (pallets, cartons, etc.) must be disposed of as prescribed by the existing regulations through authorised disposal
companies.
• Parts making up the machine must not be lifted by hooking them up from moving or weak parts such as guards, electrical runways,
pneumatic parts, etc.
• Standing under suspended loads is not allowed; unauthorised personnel are not allowed access to the work sites; it is mandatory to
wear overalls, safety footwear, gloves and a hardhat.
CENTAURO
A
cod. G19503380
USE AND MAINTENANCE
ATTENTION
CENTAURO / PA2
A
B
B
g
C
C
ENGLISH
fig. 5
53