ENGLISH
USE AND MAINTENANCE
4.7 REAR SPRING HARROW (CENTAURO)
The planting unit may be equipped with back seed covering harrow (Fig. 47).
Carry out installation before using the planting unit by following the diagram at page 66.
The working pressure of the seed covering harrow springoperated teeth can be regulated by using the lever (A, Fig. 47). When the arm
pins on the two holes are shifted, the clearance angle of the spring teeth varies (B, C and D, Fig. 47).
A
D
C
B
fig. 47
g
cod. G19503380
72