Guarantee; Expiry Of Guarantee; Identification - Gaspardo PA2 Manuel D'emploi Et Entretien

ENGLISH

1.2 GUARANTEE

On delivery, check that the equipment has not been damaged during transport and that the accessories are integral and complete.
POSSIBLE CLAIMS MUST BE PRESENTED IN WRITING WITHIN EIGHT DAYS OF RECEIPT.
The purchaser will enforce his rights on the guarantee only when he has respected the conditions concerning the benefit of the
guarantee, set out in the supply contract.

1.2.1 EXPIRY OF GUARANTEE

Besides what has already been set out in the supply contract, the guarantee expires:
- If the limits set out in the technical data table are overshot.
- If the instructions set out in this booklet have not been carefully followed.
- If the equipment is used badly, defective maintenance or other errors by the client.
- If modifications have been carried out without written authorization of the manufacturer and if non original spare parts have been
used.

1.3 IDENTIFICATION

Each individual machine has an identification plate (Fig. 1)
indicating the following details:
1) Mark and address of the Manufacturer;
2) Type and model of machine;
3) Total unladen mass, in kilograms;
4) Maximum working load capacity, in kilograms (front hopper);
5) Registration of the machine;
6) Year of manufacture;
7) CE mark.
You are advised to note down your data on the form below, along
with the date of purchase (8) and the dealer's name (9).
8) ____________________
9) ____________________
This information must always be quoted whenever assistance
or spare parts are needed.
ATTENTION
Do not remove, tamper with or make the CE mark affixed on
the machine illegible.
Refer to the information provided on the CE mark for the
manufacturer's contact details (e.g. for requesting spare
parts, etc.).
When the machine is demolished, destroy the CE marking.
46
USE AND MAINTENANCE
fig. 1
g
(1)
(2)
(4)
(3)
(5)
(6)
(7)
cod. G19503380