Expiry Of Guarantee; Identification; Technical Data; Handling - Gaspardo PENTA PE Emploi Et Entretien

1.2.1 EXPIRY OF GUARANTEE

Besides what has already been set out in the supply contract,
the guarantee expires:
- If the limits set out in the technical data table are overshot.
- If the instructions set out in this booklet have not been carefully
followed.
- If the equipment is used badly, defective maintenance or other
errors by the client
- If modifications have been carried out without written
authorization of the manufacturer and if non original spare parts
have been used.

1.4 TECHNICAL DATA

The technical data and the models provided must be considered as non binding. We reserve the right to change them without notice.

1.5 HANDLING

If the machine is handled, it must be lifted by hooking onto the
appropriate holes (A) (Fig. 1) with a suitable winch or crane of
sufficient capacity. Because of the danger involved, this operation
should be carried out by trained and responsible personnel.
The mass of the machine is on the identification Plate (8 Fig. 2).
Stretch the rope to keep the machine level.
B
A
fig. 1
cod. 19501162
USE AND MAINTENANCE

1.3 IDENTIFICATION

Each single piece of equipment, is equipped with an identification
plate (8 Fig. 2), which bears:
- CE mark
- Manufacturers mark
- Name, business name and address of the Manufacturer;
- Type of machine
- Registration of the machine
- Year of manufacture
- Mass, in Kilograms.
This information must always be quoted whenever assistance
or spare parts are needed.
The hook points can be detected by finding the «hook» symbol (8
Fig. 2).
Part (B) (Fig. 3) acts only as a guide for the lifting cables.
B
A
g
ATTENTION
B
A
ENGLISH
23