Lincoln Impinger 3200 Serie Manuel D'entretien & Manuel D'installation page 19

Section 2
4. How to Stack a Triple Stack: The stand is a 50"
(1270 mm) x 40" (1016 mm) rectangle. Set it in place with
a 50" side facing out. This will be the front of the oven.
Ovens on casters require a level floor. NOTE: The oven top
is packed with oven stand. Remove top from stand before
assembly.
P/N 4003 for 6" casters
PN/4004 for 4" casters
4A. Remove the first oven from the dolly and set it on the
stand. The control panel should be on the right rear as you
face the oven. Be sure that the oven sets squarely on the
stand and is fully seated:
5. How to stack a 3240 on a 1400, or 1600 oven: The 3240
is always to be placed on top of either the 1400 or 1600,
and never the other way around. Use the kit, Part Number
4014 for stacking on the 1400, and Part Number 4016 for
stacking on the 1600.
Part Number 11020000487 Rev A (2/16)
4B. Place the second and third ovens on top of the first
one. Be sure that they set squarely and are fully seated. The
control panels go on the right rear. Now install the top
Installation
19