Lincoln Impinger 3200 Serie Manuel D'entretien & Manuel D'installation page 18

Installation
3. How to Stack a Double Stack:
The stand is a 50" (1270 mm) x 40" (1016 mm) rectangle. Set
it in place with a 50" side facing out. This will be the front of
the oven. Ovens on casters require a level floor. NOTE: The
oven top is packed with oven stand. Remove top from stand
before assembly.
PN/4001
3A. Remove the first oven from the dolly and set it on the
stand. The control panel should be on the right rear as you
face the oven. Be sure that the oven sets squarely on the
stand and is fully seated.
18
3B. Place the second oven on top of the first one. Be sure
that it is sets on squarely and is fully seated. The control
panels go on the right rear. Now install oven top.
Part Number 11020000487 Rev A (2/16)
Section 2