Installation
,
Do not lift the ovens using the control enclosure. Lift
from the main oven cavity only. Damage may occur to
the controls of the oven if lifted by the control enclosure.
Uncrate the unit. Remove all finger components, the
conveyor, and the front door, along with all four door
knobs. The unit can then either be placed on the left side
(the side opposite to the control box), or preferably on the
front (door) side, on a four wheel moving dolly, and it will
clear a 30" (762 mm) doorway. "
Manual Gas Valve Installation
When installing the gas valve that is supplied with the oven
it is our suggestion that an elbow be placed on the oven
pipe first. This will allow the flexible hose to be attached in a
downward direction, eliminating possible stress to the hose.
16
Caution
Part Number 11020000487 Rev A (2/16)
Section 2