General Information; Hazard Statements; Notes; Target Group - Grundfos S2 Série Mode D'emploi

2. General information

2.1 Hazard statements

The symbols and hazard statements below may appear in Grundfos
installation and operating instructions, safety instructions and
service instructions.
DANGER
Indicates a hazardous situation which, if not avoided, will
result in death or serious personal injury.
WARNING
Indicates a hazardous situation which, if not avoided,
could result in death or serious personal injury.
CAUTION
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate personal injury.
The hazard statements are structured in the following way:
SIGNAL WORD
Description of the hazard
Consequence of ignoring the warning
• Action to avoid the hazard.

2.2 Notes

The symbols and notes below may appear in Grundfos installation
and operating instructions, safety instructions and service
instructions.
FM
Observe these instructions for explosion-proof products.
A blue or grey circle with a white graphical symbol
indicates that an action must be taken.
A red or grey circle with a diagonal bar, possibly with a
black graphical symbol, indicates that an action must not
be taken or must be stopped.
If these instructions are not observed, it may result in
malfunction or damage to the equipment.
Tips and advice that make the work easier.

2.3 Target group

These installation and operation instructions are intended for
professional installers.

3. Product introduction

3.1 Product description

4
3
5
9
5
2
S pump, range 72
Pos. Description
1 Inlet
2 Outlet
3 Power cables
4 Control cable
5 Lifting bracket
6 Terminal box
7 Submersible motor
8 Pump
9 Vent valve

3.2 Intended use

S pumps are designed for the pumping of sewage and wastewater
in a wide range of municipal and industrial applications.

3.3 Pumped liquids

S pumps are ideal for transferring the following
liquids:
• sewage
• wastewater.
6
7
8
1
5