Pramac GSW Manuel D'utilisation page 110

9.1 Information concerning lubricants, liquids and coolants
Engine oil
Refer to the supplied use and maintenance manual of the engine.
Engine oil viscosity
Refer to the supplied use and maintenance manual of the engine.
*Refer to the supplied manual of the engine where you will find further details for starting up the engine.
Fuel
The fuel must comply with the national and international standards regarding commercial fuels.
Refer to the supplied use and maintenance manual of the engine.
Sulphur content:
In compliance with the law, if the sulphur content is greater than 0.5%, the periodic oil changes must be altered.
Keep in mind that fuels with minimum sulphur content can cause a loss of power (approximately 5%) and
increase consumption by 2 or 3%.
108 9.SPECIFICATIONS
NOTE
The standard equipment
supplied with SAE 15W/40 oil.
NOTE
Pure mineral oils or partially
synthetic oils can be used as
long as the above-mentioned
quality criteria are
with.
is
complied
GSW