Problems, Causes And Solutions - Pramac GSW Manuel D'utilisation

7.1

Problems, causes and solutions

Perform the troubleshooting operations according to the safety information
provided in this manual.
Do not try to resolve problems whose possible causes are not described in this
paragraph so as to safeguard the persons exposed and prevent the generator
from being damaged. Contact the qualified personnel of the manufacturer.
●
● ●
● ●
●
●
● ●
●
●
● ● ●
● ● ●
●
●
● ● ●
WARNING
The generator is blocked following a
malfunction.
Discharged batteries.
Corroded
connections.
Inefficient
●
batteries or battery charger.
Faulty starter motor.
No fuel.
● Air in fuel line.
Blocked fuel filter.
Malfunction in the fuel system.
● ● Blocked air filter.
Cold weather conditions.
●
Faulty speed regulator.
Faulty voltage regulator.
●
Possible cause
Find the problem and contact the
after-sales centre if necessary.
Check and recharge the batteries.
Replace them, if necessary.
or loose battery Check the cables and terminals. If
the
corroded, replace them. Fix them in
safe conditions.
connections, damaged Check the connections to the battery
charger and the batteries.
Contact the after-sales assistance
centre to request assistance.
Check the fuel tank and add fuel if
there is no leakage.
Empty air from fuel line.
Replace the filter.
Contact the after-sales assistance
centre to request assistance.
Replace the filter.
Check the viscosity of the specific
SAE
characteristics.
Contact the after-sales assistance
centre to request assistance.
Contact the after-sales assistance
centre to request assistance.
7.TROUBLESHOOTING
GSW
Solution
terminals and bolts are
lube oil and the fuel
101