Setting The Time (Time) - Seca 757 Mode D'emploi Et Garantie

Setting the time (Time)

72 •
2. Select the menu item "APrt" in the "rF" submenu
and confirm your selection.
3. Select the appropriate setting for your combination
of devices:
– HI: measured results from length measuring
devices (not functional with this model)
– MA: measured results from scales
– HI_MA: measured results from length meas-
uring devices and scales (not functional with
this model)
– Off: no automatic printout, printout only if
Enter key is held down during weighing.
4. Confirm your selection.
You exit the menu automatically.
You can configure the system so that the wireless
printer automatically adds the date and time to your
measured results. To do so, you have to set the date
and time once on the device and transmit this to the
wireless printer's internal clock.
NOTE
This function is only accessible if the "Learn"
function has been used to integrate a
seca wireless printer in the wireless group.
1. Switch on the device.
2. Select the "tiME" menu item from the "rF" sub-
menu.
3. Confirm the selection.
The current selection for "year" (YEA) is displayed.
4. Set the correct year.
5. Confirm the selection.
6. Repeat steps 4. and 5. as appropriate for "month"
(Mon), "day" (dAY), "hour" (hour) and "minute"
(Min).
7. Confirm your selection each time.
After confirming your setting for "minute", you exit
the menu automatically.
The settings are automatically transmitted to the
wireless printer.
The wireless printer automatically adds the date
and time to every printout.