Select Attenuation (Fil); Setting The Display Backlighting (Lcd) - Seca 757 Mode D'emploi Et Garantie

Select attenuation (FiL)

Setting the display
backlighting (Lcd)
3. Select a menu item
– PrESS: acoustic signal whenever a key is
pressed
– HOLd: acoustic signal when weighing value is
stable
4. Confirm your selection.
The current setting is displayed.
5. Select the setting you require:
– On
– Off
6. Confirm your selection.
You exit the menu automatically.
7. If you also wish to activate the acoustic signals for
the second function, repeat this process.
You can use attenuation (Fil = filter) to reduce any inter-
ference during weighing (e.g. caused by patient move-
ments).
1. Select the "Fil" item from the menu.
2. Confirm the selection.
The current setting is displayed.
3. Select an attenuation level.
– 0: low attenuation
– 1: moderate attenuation
– 2: high attenuation
4. Confirm the selection.
You exit the menu automatically.
You can change the duration and brightness of the
display backlighting.
1. Select the "Lcd" item from the menu.
2. Confirm the selection.
3. Select a menu item
– dUr: duration
– bri: brightness
4. Confirm your selection.
The current setting is displayed.
English
Operation • 65