Restoring Factory Settings (Reset) - Seca 757 Mode D'emploi Et Garantie

Restoring factory
settings (RESET)
66 •
5. Select the setting you require:
Function
Duration
Brightness
6. Confirm your selection.
You exit the menu automatically.
7. If you also wish to make settings for the second
function, repeat this process.
You can restore the factory settings for the following
functions:
Function
Autohold (AhoLd)
Acoustic signal (PrESS)
Acoustic signal (HoLd)
Attenuation (FiL)
Wireless module (SYS)
Autosend (ASEnd)
Autoprint (APrt)
NOTE
The wireless module is switched off when fac-
tory settings are restored. Information about
existing wireless groups is retained. Wireless
groups do not have to be set up again.
1. Select the "rESEt" item from the menu.
2. Confirm the selection.
You exit the menu automatically.
3. Switch off the scale.
Factory settings are restored and are available
when the scale is next switched on.
Setting
• Short (approx. 15 sec.)
• Long (approx. 45 sec.)
• PErM (continuous)
• 50 %
• 100 %
• Off
Factory setting
depending on
model
Off
On
1
Off
Off
Off