Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Selecting the matching needle/nozzle set:
The end of the substance needle features grooves which
determine the size of the corresponding needle/nozzle
set. Example: a needle with two grooves at the end is
used in conjunction with needle/nozzle set no. 2.
Tip Selection
# 2
0.8 mm Primers/stain with low viscosity, small surfaces
# 3
1.3 mm Additionally water-based or solvent-based primer, undercoats, varnish
# 4
1.8 mm As previously for medium viscosity and object sizes
# 5
2.2 mm As previously for medium to highly viscous substances and medium-sized to larger surfaces
# 6
2.5 mm As previously for highly viscous substances and larger surfaces
Adjusting the vacuum pipe
The adjustable rotating joint pipe means the gun can be
held in any position during spraying.
Proceed as follows to adjust the position of the pipe in the
cup:
1. Undo the nut (F). Turn the cup to the desired spraying
position.
2. Tighten the nut (F).
Recommendation for coating substance and object dimensions
115
Translation of the original instruction
Publicité
Table des Matières
