Quick Guide Ae 6790; Functions - Albrecht AE 6790 Guide D'utilisation

80/40 dE D, CZ, SK
40/40 EU B, BG, CH, D, E, EST, F, FIN, FL, GR, IRL, I, LV, NL, P, PL, RO
Please note the still different licensing and charge regulations in some countries
(see device ID!).
40/40 E
E, IT, and new Europe CEPT Standard from July 2011: AM 4 Watts, FM 4 Watts,
40 channels.
Please note the standards in most countries must still be implemented.
40FM EC
Previous CEPT setting for countries without AM
For temporary use while travelling in all EU countries when it is unknown which
standard applies. Unfortunately, in Austria the use of switchable radios is not
permitted, this applies also for 40 FM mode.
Country code: Press the MT button, select the country code with the channel selector and press
the MT button again.
Power knob: Switch device on/off
VR Set volume
FC Function button: briefly press the VR rotary knob, FC is displayed. Now select
secondary function. Secondary functions are printed in white next to the buttons.
A/F Select modulation mode (AM or FM, if activated)
CH / UP / DN Select radio channel
SQ Squelch: turn clockwise for repressing weak signals. At right limit stop only strong
signals come through. Best setting is where the background noise just disappears.
PTT Press and hold the push-to-talk button on the side of the microphone for
transmission. Talking distance: some cm
SC Channel SCAN on/off: briefly press the SC button
DW Dual watch monitoring. Select channel, press the DW button, then select secondary
channel
LOC FC + LOC Local/DX selection (receiver sensitivity)
BP Key beep tones on/off: press and hold the VR rotary knob (3s)
CH 9 Direct selection channel 9 and return to previous channel
FRQ Frequency display instead of channel number
M1 to M3 Select memory: briefly press FC + M1, M2, or M3
Change memory: select channel, then press FC + press and hold M1, M2, or M3.

Quick Guide AE 6790

The most important functions on a glance
Program country setting before first use:

Functions

14