Connecting The Water Outlet - Struers RotoPol-11 Manuel D'instructions

Connecting the Water Outlet

RotoPol-11/-15
Instruction Manual
Mount the other end of the pressure hose on the water mains
tap for cold water:
− Mount the reduction ring with gasket on the water mains
tap, if necessary.
− Introduce the gasket and tighten the coupling nut
completely.
Locate the end of the drain hose where a short length of the
steel reinforcement has been stripped away. Mount the
stripped end of the hose onto the water outlet tube. Use the
included hose clamp for fastening.
Lead the other end of the drain hose to the water outlet.
Arrange the tube so that it slopes throughout its length.
Shorten the hose, if necessary. The drain hose should be
attached to the water outlet system if possible.
Avoid sharp bends in the drain hose and make sure that the hose slopes
IMPORTANT
Connect only to cold water.
REMEMBER
throughout its length.
5