Advanced Operations; Selection Of Disc; Mounting Of Specimen Mover (Optional); Connection To Multidoser (Optional) - Struers RotoPol-11 Manuel D'instructions

Selection of Disc

Mounting of
Specimen Mover (Optional)
Connection to
Multidoser (optional)
RotoCom Memory Unit
(optional)

Setting the Communication

14
RotoPol-11/-15
Instruction Manual

1. Advanced Operations

RotoPol-11/-15 is designed for MD-Disc of 200 mm dia., wet
grinding discs of 230 mm dia. and polishing discs of 200mm dia.
For automatic preparation of specimens, only aluminium discs
should be used. See the instructions for RotoForce-1.
RotoPol-11/-15 can be equipped with a RotoForce-1 specimen
mover. To mount the specimen mover, see the Instruction Manual
of RotoForce-1.
If RotoPol-11/-15 has to be relocated, the specimen mover should be
RotoPol-11/-15, combined with a specimen mover, can be equipped
with Multidoser for automatic dosing of suspensions and
lubricants. To connect Multidoser, see the appropriate Instruction
Manual.
RotoPol-11/-15, combined with RotoForce-1 and Multidoser, can
be equipped with a RotoCom memory unit. To connect RotoCom to
RotoPol, see the appropriate Instruction Manual.
m
Press MENU to activate the set-up menu.
COMMUNICATION
STANDARD
D U
L L
D U
COMMUNICATION
ROTOCOM
o
Press STOP when the desired setting appears.
IMPORTANT
removed.
Move to the COMMUNICATION menu
m
using the MENU
L
Press SELECT to toggle between
STANDARD and ROTOCOM:
- Select STANDARD if RotoPol is used as
a single unit or if combined with a
RotoForce-1 and/or Multidoser.
- Select ROTOCOM when RotoPol is
connected to a RotoCom unit
keys.