Connection To Water Outlet; Software Settings - Struers RotoPol-21 Mode D'emploi

Connection to Water Outlet

Software Settings

RotoPol-21/-22/-25
Instruction Manual
Locate the end of the drain hose where a short length of the
steel reinforcement has been stripped away. Mount the
stripped end of the hose onto the water outlet tube. Use hose
clamp for fastening.
Lead the other end of the drain hose to the water outlet.
Arrange the tube so that it slopes throughout its length.
Shorten the hose, if necessary. The drain hose should be
attached to the water outlet system if possible.
Avoid sharp bends in the drain hose and make sure that the hose slopes
Switch on the power at the main switch. The following display
will appear briefly:
- RotoPol-2X -
VERSION X.Y
The operation menu will then appear:
WATER OFF 150RPM
REMEMBER
throughout its length.
7