Struers RotoPol-11 Manuel D'instructions page 26

Mounting a Disc
Starting the Disc
Stopping the Disc
Grinding/Polishing
Settings
Setting to User Select
Setting to GRINDING
Setting to POLISHING
22
RotoPol-11/-15
Instruction Manual
Quick Reference Guide
Place the disc on the turntable and turn it until the three driving
pins engage with the holes in the turntable.
s
Press START . The disc starts rotating. The selected functions
are executed and connected RotoSystem modules start operating.
o
Press STOP . The disc stops rotating. The selected functions
and connected RotoSystem modules are stopped.
Mount the required surface on a disc.
Mount the disc on the turntable.
Select the desired functions, if RotoCom is not connected.
s
Press START .
WATER OFF 150 RPM
D U
AN AO
D U
WATER ON 300RPM
GRINDING
D U
AN AO
D U
WATER OFF 150RPM
POLISHING
The User Select screen has an empty
line at the bottom.
w W
- Press or to select WATER ON or
WATER OFF.
d
- Press SPEED 150 or
the speed. (RotoPol-11)
dN
- Press SPEED
speed. (RotoPol-15)
AN
Press DISC or
between the settings.
The standard setting GRINDING is pre-
set to WATER ON and 300RPM.
AN
Press DISC or
between the settings.
The standard setting POLISHING is
pre-set to WATER OFF and 150RPM.
d
300 to select
dO
or to adjust the
AO
to change
AO
to change