Finish Framing - Napoleon HD35NT-2 Manuel D'installation Et D'utilisation

4 3/4"
70"
121mm
177.8cm *
FRAMING DIMENSIONS
Ref HD35-2
35 3/4" (90.8cm)
A
* Allow for finished floor and hearth thickness when setting these dimensions.
** When constructing the enclosure allow for finishing material thickness to maintain clearances.
WARNING
!
DO NOT BUILD INTO THIS AREA - IT MUST BE LEFT
• Do not build into this area. It must be left clear
CLEAR TO PROVIDE ADEQUATE CLEARANCE FOR
to provide adequate clearance for the vent in
THE VENT IN THIS 14" (35.6CM) WIDE AREA CENTERED
this 14" (35.6cm) wide area centered along the
ALONG THE FRONT OF THE APPLIANCE. NO
front of the appliance. No combustibles are
COMBUSTIBLES ARE ALLOWED. allowed.
3 1/2" 89mm MAX
14"
35.6cm MIN
1 1/2" 38mm MAX
22 1/4"
41 1/4"
56.5cm **
104.8cm *
A
HD40-2 HD46-2
40 3/4" (103.5cm) 46 3/4" (118.7cm)

9.0 finish framing

WARNING
!
note:
NOTE: THREE BRACES ARE REQUIRED (AS
Three braces are required (as nailers).
NAILERS).
6 1/2"
165mm
EN
39
W415-2197 / C / 10.14.20