Glass Door Removal / Installation - Napoleon HD35NT-2 Manuel D'installation Et D'utilisation

10.2

glass door removal / installation

Before the glass door can be removed, the surround with safety screen must be removed (see "safety screen
removal / installation" section).
The glass door is secured to the top front edge of the
appliance with two latches. Pull the handles of the latches
forward, then lift the latches out from the door frame to
release the top of the door. Next, pivot the door forward
until the top edge clears the front of the appliance.
Carefully grip the sides of the door lifting it out from the
retainer along the bottom of the door.
note:
These latches make up the spring relief system for
the appliance. Ensure they open freely and close
sealed.
Reverse these instructions to reinstall the door and surround with safety screen. Ensure the surround with safety
screen is installed correctly.
finishing
HANDLES
W415-2197 / C / 10.14.20
EN
41