Basic Operations; Switching The Power On/ Off; Adjusting The Volume - Kenwood TH-D72A Mode D'emploi

SWITCHING THE POWER ON/ OFF

Press the [ ] (1s) to switch the transceiver ON.
• The power on message momentarily appears on the display.
• If the transceiver power on password has been activated {Menu No.100}, you must fi rst
enter your password before you can operate the transceiver.
Press the [ ] (1s) again to switch the transceiver OFF.
Note: While using APRS, in order to prevent Packet miss-decoding, access Menu No. 110 and set
the Battery Saver to "Off" or "0.03".

ADJUSTING THE VOLUME

Rotate the VOL control to increase the volume and counterclockwise to decrease
the volume.
Note:
◆ Some functions of this transceiver, such as the beep, have their own volume settings. Adjust
those settings to your desired values.
◆ Access Menu No. 121 to set the volume balance between Band A and B.
14

BASIC OPERATIONS