Basic Operations; Switching Power On/Off; Adjusting The Volume; Selecting A Zone And Channel - Kenwood TK-D240 Guide De L'utilisateur

SWITCHING POWER ON/OFF

Turn the Power switch/ Volume control clockwise to switch the
transceiver ON.
Turn the Power switch/ Volume control counterclockwise fully to
switch the transceiver OFF.

ADJUSTING THE VOLUME

Rotate the Power switch/ Volume control to adjust the volume.
Clockwise increases the volume and counterclockwise
decreases it.

SELECTING A ZONE AND CHANNEL

1 Select the desired zone using the key programmed as [Zone
Up] or [Zone Down].
• Each zone contains a group of channels.
2 Select the desired channel using the Selector (default).
• Each channel is programmed with settings for transmitting and
receiving.

TRANSMITTING

1 Select the desired zone and channel.
2 Press the key programmed as [Monitor] or [Squelch Off ] to
check whether or not the channel is free.
• If the channel is busy, wait until it becomes free.
3 Press the PTT switch and speak into the microphone.
Release the PTT switch to receive.
• For best sound quality, hold the transceiver approximately
1.5 inches (3 cm to 4 cm) from your mouth.
16

BASIC OPERATIONS