Options; Memory Control Program Mcp-4A - Kenwood TH-D72A Mode D'emploi

The following options are available for use with this transceiver:
• PB-45L Li-ion battery pack
• BT-15 Battery case
• KSC-32 Rapid charger
• SMC-32 Speaker microphone
• SMC-34 Speaker microphone
• EMC-3 Clip microphone with
earphone
• EMC-11 Clip microphone with
earphone
Note: Optional accessories for use with this transceiver may change, post-production. (New
options may become available and/or current options may be discontinued.) Please refer to the
options catalog(s) for applicable transceivers.

MEMORY CONTROL PROGRAM MCP-4A

The following functions can be set only by using the MCP-4A software:
• Power on password value
• Bitmap setting of the Power ON graphic
Using the MCP-4A software, you can:
• View memory channel groups
• Save/load settings
• Read exported TravelPlus for Repeaters
(There are some version restrictions; refer to the help text of the MCP-4A.)
• Export memory and various settings in html
(TravelPlus for Repeaters is a trademark of ARRL.)
To download the MCP-4A software, go to:
http://www.kenwood.com/i/products/info/amateur/software_download.html
Note: This URL may change without notice.
Using the MCP-4A Software
1 Follow the directions of the installer to install the software.
2 Set up the PC COM port.
3 The transceiver data is read from the MCP-4A software.
4 Select your desired settings, then write the data to the transceiver.

OPTIONS

• EMC-12
• HMC-3
• KHS-21
• KHS-35F
• PG-3J
• PG-2W
• PS-60
TM
fi les issued from the ARRL
Clip microphone with
earphone
Headset
Headset
Headset
Cigarette lighter cord
DC cable
DC Power Supply
TM
35