Basic Operations; Switching Power On/ Off; Adjusting The Volume; Selecting A Zone And Channel - Kenwood NX-5000 Serie Guide De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SWITCHING POWER ON/ OFF

Turn the Power switch/ Volume control clockwise to switch the
transceiver power ON.
Turn the Power switch/ Volume control counterclockwise to
switch the transceiver power OFF.

ADJUSTING THE VOLUME

Rotate the Power switch/ Volume control to adjust the volume.

SELECTING A ZONE AND CHANNEL

1 Select the desired zone using the 4-way D-pad or the keys
programmed as [Zone Up]/ [Zone Down]. Each zone
contains a group of channels.
2 Select the desired channel using the Selector knob or the
keys programmed as [Channel Up]/ [Channel Down]. Each
channel is programmed with settings for transmitting and
receiving.
The default setting for the Selector knob is [Channel Select].
The transceiver may have names programmed for zones and
channels. The zone name and channel name can contain up to 16
and 14 characters respectively. While selecting a zone, the zone
name will appear above the channel name.
If programmed by your dealer, your transceiver will announce the
zone and channel numbers as you change them.
24

BASIC OPERATIONS

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Nx-5200Nx-5300Nx-5400

Table des Matières