Kenwood TH-D72A Mode D'emploi page 19

[ ], [ ]
Press [ ] or [ ] to select an operating frequency, Memory channel, Menu
number, setting value or to change the scan direction, etc.
The [ ]/ [ ] keys function in the exact same way as the Tuning control.
These keys change frequencies, memory channels, or other selections,
depending on the current transceiver mode.
[ OK]
Press to move to the next step or to complete the setting in various
[ OK]
selection modes such as Function Select or Menu mode.
[ESC ]
Press to move back to the previous step or to quit the setting in
[ESC ]
various selection modes such as Function Select or Menu mode.
[A/B]
Press [A/B] to select operation band A or B.
Press [F], [A/B] to select a frequency band.
[MENU]
Press [MENU] to enter Menu mode.
Press [F], [MENU] to cycle the transmit output power between: High Power
–> Low Power –> Economic Low Power.
[F]
Press [F] to enter Function mode.
Press [F] (1s) to turn the transceiver key lock function ON and OFF.
[VFO]
Press [VFO] to enter VFO mode, then press [
control to select an operating frequency.
Press [F], [VFO] to copy the current Memory channel or Call channel to the
VFO (memory shift).
[MR]
Press [MR] to enter Memory Channel mode, then press [
Tuning control to select a Memory channel.
Select a Memory channel, then press [F], [MR] to store the current operating
frequency in the Memory channel.
[CALL]
Press [CALL] to select the Call channel.
Press [F], [CALL] to store the current operating frequency to the Call channel.
]/[ ] or rotate the Tuning
]/[ ] or rotate the
9