Specified Conditions Of Use; Residual Risk; Emergency Procedure - Güde GTK 2000 Traduction Du Mode D'emploi D'origine

English English
device. Accumulated sawdust is combustible and
may self-ignite.
e) The table saw must be secured. A table saw that
is not properly secured may move or tip over.
f) Remove tools, wood scraps, etc. from the table
before the table saw is turned on. Distraction or
a potential jam can be dangerous.
g) Always use saw blades with correct size and
shape (diamond versus round) of arbour holes.
Saw blades that do not match the mounting
hardware of the saw will run off-centre, causing
loss of control.
h) Never use damaged or incorrect saw blade
mounting means such as flanges, saw blade
washers, bolts or nuts. These mounting means
were specially designed for your saw, for safe
operation and optimum performance.
i) Never stand on the table saw, do not use it as a
stepping stool. Serious injury could occur if the
tool is tipped or if the cutting tool is accidentally
contacted.
j) Make sure that the saw blade is installed
to rotate in the proper direction. Do not
use grinding wheels, wire brushes, or
abrasive wheels on a table saw. Improper
saw blade installation or use of accessories not
recommended may cause serious injury.
Specified Conditions of Use
Use this circular saw to cut only wood and wood like
products.
Never use the Circular table saw to cut materials other
than those specified in the instruction manual.

Residual Risk

Rip cutting, cross cutting, mitre cutting and bevel
cutting using max. one mounted saw blade.
Residual Risk
Despite the observance of the operating instructions
there still may be some hidden residual risks.
Risk of injury!
Always keep hands away from the path of the
saw blade.
In spite of compliance with all relevant
design regulations, dangers may still present
themselves when the machine is operated, e.g.:
- Fragments of workpiece or of a broken
accessory may fly away and cause injury
beyond immediate area of operation.
- noise emissions
- wood dust emissions.

Emergency procedure

Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down.
If you seek help, state the following pieces of infor-
mation:
1. Accident site ,
2. Accident type,
3. Number of injured persons,
4. Injury type(s)
Maintenance
Unplug the machine before any work on it.
Prior to every use, visually check the machine to rule
out any defects, in particular on the power cable and
the plug.
WARNING The appliance must not be used if dama-
ged or safety equipment is defective. Replace any
worn-out and damaged parts.
If the device is defective, the repair has to be made
exclusively by the customer service.
Use only original accessories and original spare parts.
Only a regularly maintained and treated appliance
can serve as a satisfactory aid. Insufficient
maintenance and care can lead to unforeseen
accidents and injuries.
39