Specified Conditions Of Use - Güde GTK 2100.1 Traduction Du Mode D'emploi D'origine

ENGLISH
32
Requirements for operating staff
The operating staff must carefully read the
Operating Instructions before using the appliance.
Since the use of the device if handled incorrectly
can entail considerable risks, only knowledgeable
persons may be entrusted with the use of it.
The operator must be appropriately trained in
setting up, operating and using the machine.
Qualification: : Persons over 16 years of age
can only work on the appliance. An exception
includes youngsters trained in order to
reach knowledge under supervision of the trainer
during occupational education.
Minimum age: :Persons over 16 years of age
can only work on the appliance. An exception
includes youngsters trained in order to
reach knowledge under supervision of the trainer
during occupational education.
Training: : Using the appliance only requires
corresponding training by a professional or the
Operating Instructions. No special training is
necessary. The operator is responsible for accidents
or risks to third parties.
SYMBOLS
Caution!
Read the Operating Instructions
Unplug the machine before any work
on it.
Wear eye protective goggles !
Wear ear protectors!
Wear gloves!
Wear protective shoes.
Always keep hands away from the path
of the saw blade.
Keep dry at all times.
Never expose tool to rain.
Forbidden operation for persons with
chainlet
Do not operate the power tool when
wearing a tie
Forbidden operation for persons with
long hair.
The appliance must be stored in a dry
place and protected from frost.
Keep the machine out of reach of
children.
Warning against dangerous voltage
Keep bystanders in safe distance from
the appliance (at least 5m)
Warning against thrown-off items
Warning against hand injuries
Class II tool.
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres..
CE marking
TÜV / GS conformity mark
Two persons are required for
implementation.
>20 kg (44 lbs)

Specified Conditions of Use

Use this circular saw to cut only wood and wood like
products.
Never use the Circular table saw to cut materials other
than those specified in the instruction manual.
Residual Risk
Rip cutting, cross cutting, mitre cutting and bevel
cutting using max. one mounted saw blade.
Please observe that the cutting of bevels/wedges
and complex covered cutting procedures are not
permitted.
Only cut materials that are similar to wood and
ensure the material is fed forwards slowly and evenly.
Hard materials, feeding the material forwards too
quickly and foreign objects in the material can lead to
overheating and the saw teeth breaking off.