Güde GTK 2000 Traduction Du Mode D'emploi D'origine page 40

English
36
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool's operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the power tool
for operations different from those intended could
result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles
and grasping surfaces do not allow for safe
handling and control of the tool in unexpected
situations.
Battery tool use and care
a) Recharge only with the charger specified by the
manufacturer.A charger that is suitable for one
type of battery pack may create a risk of fire when
used with another battery pack.
b) Use power tools only with specifically
designated battery packs.Use of any other
battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals
together may cause burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause
irritation or burns.
e) Do not use a battery pack or tool that is
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
f) Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire or
temperature above 130 °C may cause explosion.
g) Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the instructions.
Charging improperly or at temperatures outside
the specified range may damage the battery and
increase the risk of fire.
5) Service
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
Requirements for operating staff
The operating staff must carefully read the
Operating Instructions before using the appliance.
Since the use of the device if handled incorrectly
can entail considerable risks, only knowledgeable
persons may be entrusted with the use of it.
The operator must be appropriately trained in
setting up, operating and using the machine.
Qualification: : Apart from the detailed
instructions by a professional, no special
qualification is necessary for appliance using.
Minimum age: :Persons over 16 years of age
can only work on the appliance. An exception
includes youngsters trained in order to
reach knowledge under supervision of the trainer
during occupational education.
Training: : Using the appliance only requires
corresponding training by a professional or the
Operating Instructions. No special training is
necessary. The operator is responsible for accidents
or risks to third parties.
SYMBOLS
Caution!
Read the Operating Instructions
Unplug the machine before any work
on it.
Wear eye protective goggles !
Wear ear protectors!
Wear gloves!
Wear protective shoes.
Always keep hands away from the path
of the saw blade.
Keep dry at all times.
Never expose tool to rain.