Princess Cool White Mode D'emploi page 16

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 25
• The baking tin supplied with this
appliance is finished with a non-stick
PTFE coating. When heated this
coating may release small amounts of
gases which are totally harmless to
humans. However, the nervous
system of birds has been found to be
extremely sensitive to these gases.
Therefore, this appliance should not
be used near cage birds (for example,
tropical birds such as parrots).
Preparing the appliance for use
1 Put the appliance on a flat, stable
surface where it cannot fall.
2 Place the kneader on the shaft on the
bottom of the tin. Turn the kneader till
you feel that it is fixed on the shaft.
Before baking, it is recommended to fill the
holes around the shaft of the kneader in
the baking tin with butter before placing the
kneader. This prevents the dough from
sticking in this place and facilitates the
removal of the kneader from the bread
when it is ready.
Use
Adding ingredients
1 Weigh the required ingredients for the
recipe.
Never fill the appliance with more than
the maximum quantity (a total of a maxi-
mum of 500 g (1.1 lb.); otherwise the
dough will spill over the baking tin.
2 Add the ingredients one by one to the
baking tin. Begin by pouring water or
liquid into the baking tin. Then add the
flour and - depending on the recipe -
add sugar, salt, butter and yeast or
baking powder.
Put the yeast or baking powder in a
hollow in the flour and each of the other
ingredients in one corner of the baking
tin (this is particularly important when
using the timer).
12
Breadmaker Cool White Article 152001
3 Hold the baking tin with the handle and
place it in the appliance, press it down
and rotate it clockwise until it clicks in
position.
4 Close the lid.
• Make sure there is sufficient free
space around the appliance. This will
ensure that the vapour is distributed
well and items close to the appliance
will not become damp.
• Do not use sharp tools with the tin,
such as metal spatulas, knives and
forks. This may damage the non-stick
coating.
Setting the program
1 Put the plug into the wall socket.
A beep will be heard and a light will
indicate the BASIC program. This is the
default program.
2 Select the required program by
pressing the MENU button repeatedly
until the light indicates the required
program.
See 'MENU selection'.
Baking
3 Press the START/STOP button. A short
beep will be heard to indicate that the
selected program is started.
The indicator lights around the START/
STOP button will blink to show that the
program is running.
• The MENU button is inactive from now
on to avoid unwanted program
changes by accidentally pressing this
button.
• The program can be stopped by
pressing the START/STOP button for
more than 3 seconds. A short beep
will be heard to indicate that the
program has stopped.
• Always use the appliance with the lid
closed.
• The appliance will automatically
switch off in the event of a power

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

152001

Table des Matières