Introduction / Technical Data; Technical Description - Migatronic MWF 50 YARD Manuel D'instruction

Connection to power source
The wire feed unit MWF 50 YARD is designed for
connection to the MIGATRONIC power source
SIGMA.
Configuration
MIGATRONIC disclaims all responsibility for damaged
cables and other damages related to welding with
under sized welding torch and welding cables
measured by welding specifications e.g. in relation to
permissible load.
Dispose of the product according to local
standards and regulations.
www.migatronic.com/goto/weee
Important!
In order to avoid destruction of plugs
and cables, good electric contact is
required when connecting earth
cables and intermediary cables to
the machine.
Technical data
100% duty cycle 420 A
60% duty cycle
Wire speed
Mains voltage
Efficiency
Torch connection
Dimension wire reel
Separate wire reel
Separate intermediary cable
1
Protection class
Dimensions (LxWxH)
Weight
1
Equipment marked IP23 is designed for indoor and outdoor
applications
MWF 50 YARD
500 A
0.5 - 30 m/min
40 V AC
250 VA
EURO
200 mm
no
yes
IP23
54x20x38 cm
10.1 kg

Technical description

1. Welding current, [A]
2. Wire feed speed, [m/min]
3. Material thickness, [mm]
4. Welding voltage, [V]
5. Trim voltage, [V]
6. Arc adjust
7. Seam average log – current/voltage
8. Warning - Overheating
9. Info – globular transfer
Risk of weld spatter
10. Fault indicator – See SIGMA instruction
manual
11. Display of welding current, wire feed speed or
material thickness
8