Technical Data; Disposal; Ec-Declaration Of Conformity - Batavia MAXXPACK BT–CCS002 Mode D'emploi

English
ble from dirt and dust. Rub the electric
power tool with a clean cloth or blow
over it with low pressure compressed air.
• We recommend that you clean your
electric power tool immediately after
each use.
• Clean the electric power tool regularly
with a damp cloth and somewhat soft
soap. Do not use any cleaning or solvent
materials; these can attack the device's
plastic components. Make sure that no
water can get inside the electric power
tool.
Maintenance
14.2
There are no inner parts of the tool which
need maintenance.

15. Technical data

Nominal voltage:. . . . . . . . . . . . 18 V DC
Nominal power: . . . . . . . . . . . . . 50 W
No load speed: . . . . . . . . . . . 6500 min
Filing angle up to:
. . . . . . . . . . 0 – 35° to the left and right
Grinding disc outer diameter: . . Ø 108 mm
Grinding disc inner diameter: . . . Ø 23 mm
Grinding disc thickness:
. . . . . . . . . . . . . . 2.7 mm and 3.2 mm
For saw chains: . . . . . . . 0.325" and 3/8"
Weight: . . . . . . . . . . . . . . . . . 1.75 kg
Sound pressure level L
Uncertainty K : . . . . . . . . . . . . 3 dB(A)
pA
Sound power level L
Uncertainty K : . . . . . . . . . . . . 3 dB(A)
WA

16. Disposal

Do not dispose of electric power
tools with domestic refuse.
The electric power tool is shipped
in packaging to reduce transport damage.
This packaging is a raw material and as such
can either be reused or can be fed back into
the raw material cycle. The electric power
tool and its accessories are made from vari-
ous materials such as metals and plastics.
Take defective components to a special
refuse collection point. Ask about these at
your specialist shop or local council.
8
: . . . . . 54.1 dB(A)
pA
: . . . . . . .67.1 dB(A)
WA
Batteries
16.1
Think of the environment when disposing of
batteries. Contact your local authorities to find
out where your nearest disposal area is. Do not
dispose of batteries with domestic refuse. Do
not dispose of by burning, risk of explosion.

17. EC-Declaration of conformity

We, the Batavia B.V., Weth. Wassebali-
estraat 6d, NL-7951 SN Staphorst, declare
by our own responsibility that the product
Cordless chain sharpener, Item-No
7063640, Model Nr. BT–CCS002 is accord-
ing to the basic requirements, which are
defined in the European Directives Electro-
magnetic Compatibility 2014/30/EU
(EMC), 2006/42/EC (Machinery), RoHS:
2011/65/EU and their amendments. For the
evaluation of conformity, the following har-
monized standards were consulted:
EN 61029-1:2009+A11;
-1
AfPS GS 2019:01;
EN 55014-1:2006+A2;
EN 55014-2:2015
Staphorst, 8 juli 2021
Meino Seinen, QA Representative
Batavia B.V., Weth. Wassebaliestraat 6d,
7951 SN Staphorst, Netherlands
The product and the user manual may be
subject to changes. Technical data may be
changed without prior notice.