Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
•
Now blow hot air into the coals or wood
from a distance of around 5 – 10 cm, until
the coals or wood is burning properly.
•
Doing this will help to avoid damaging the
nozzle attachment. Exposing the nozzle to
high temperatures for a prolonged period
of time could cause the material to melt.
Please follow these instructions to achieve
long-term enjoyment with the product.
Watch Out! To avoid overheating of the BBQ
or Fireplace do not use the device for longer
than necessary.
COOLING:
Before turning off the device, it must be cooled
first. Select temperature setting I for at least
one minute. The device can be switched off
thereafter.
Place the appliance on its stand (10) after use
and allow it to cool down before storage
STORAGE:
Make sure that the device has completely
cooled down before storing.
CLEANING
Keep the ventilation slots of the machine clean
to prevent overheating of the engine. Regularly
clean the machine housing with a soft cloth,
preferably after each use. Keep the ventilation
slots free from dust and dirt. If the dirt does not
come off use a soft cloth moistened with soapy
water. Never use solvents such as petrol, alco-
hol, ammonia water, etc. These solvents may
damage the plastic parts.
TECHNICAL DATA
Voltage:. . . . . . . . . . 230 – 240 V~ 50 Hz
Power: . . . . . . . . . . . . . . . . 2000 W
Air flow: . . . . . . . . . . . . 500 litres/minute
Setting I: . . . . . . . . . . . . . . . . .50 °C
Setting II: . . . . . . . . . . . . . . . . 400 °C
Setting III: . . . . . . . . . . . . . . . . 600 °C
7062246_Maxxheat_Ma_#1503-18.indb 17
DISPOSAL
Do not dispose of electric power tools
with domestic refuse.
The electric power tool is shipped in
packaging to reduce transport damage.
This packaging is a raw material and as such
can either be reused or can be fed back into
the raw material cycle. The electric power tool
and its accessories are made from various
materials such as metals and plastics. Take
defective components to a special refuse col-
lection point. Ask about these at your specialist
shop or local council.
EC-DECLARATION OF CONFORMITY
We, the Batavia GmbH, Weth. Buitenhuis-
straat 2a, NL-7951 SM Staphorst, declare by
our own responsibility that the product Maxx-
Heat, Model BT-HG001, Item-No 7062246,
is according to the basic requirements, which
are defined in the European Directives Electro-
magnetic Compatibility 2004/108/EC
(EMC), 2006/42/EC (Machinery) and their
amendments. For the evaluation of conformity,
the following harmonized standards were
consulted:
EN 60335-1
EN 60335-2-45
EN 62233
EN 55014-1
EN 55014-2
EN 61000-3-2
EN 61000-3-3
Staphorst, 15 February 2015
Meino Seinen, QA Representative
Batavia GmbH, Weth. Buitenhuisstraat 2a,
7951 SM Staphorst, Netherlands
.
English
17
10-12-15 11:03
Publicité
Table des Matières
