Use; Cleaning, Maintenance And Storage; Technical Data; Waste Treatment And Recycling - Batavia MAXXPACK BT-GS001 Mode D'emploi

English
Setting the spray jet
6.5
a. On the nozzle, the spray jet can be
adjusted from spot-shaped to a fine
spray for a larger area.
b. Turn the adjustable nozzle (1) counter-
clockwise to obtain a narrower to spot-
shaped spray jet.
c. Turning the adjustable nozzle clockwise
produces a wider spray jet.
Extending the spray lance
6.6
a. Loosen the retaining nut (2).
b. Pull the telescopic tube outwards to set
the desired length.
c. Tighten the locking nut again.

7. Use

Switching the pressure sprayer ON/
7.1
OFF
a. To switch the sprayer ON, press the
ON/OFF switch (6).
b. To dispense liquid from the spray lance,
squeeze the trigger (4).
c. To stop the liquid flow from the spray
lance, release the trigger.
d. To switch the sprayer OFF, press the
ON/OFF switch again.
Trigger lock
7.2
a. The locking function is useful when you
need to spray for an extended period or
when you have to spray a large area.
b. To lock, squeeze the trigger (4) and pull
the trigger forward.
c. To unlock, squeeze the trigger and slide
the trigger backwards.
Attention: Unlock the trigger after each use!
8. Cleaning, maintenance and
storage
Cleaning
8.1
• Keep safety devices, ventilation outlets
and the engine housing free of dust and
dirt as well as possible. Wipe the
machine with a clean cloth or blow it
clean with low-pressure compressed
air.
• We recommend cleaning the machine
immediately after each use.
• Clean the machine regularly with a
damp cloth and a little mild soap. Do
8
not use cleaning agents or solvents;
these may damage the plastic parts of
the machine. Make sure that no water
can get into the inside of the machine.
• Dispose of residual liquid in accordance
with the regulations and manufacturer's
instructions.
• Empty the machine and flush it with
clean water.
Maintenance
8.2
There are no serviceable parts inside the
machine.
Storage
8.3
• Store the unit and accessories in a dark,
dry and frost-free place.
• Only store completely clean and dry
units.
• Always store the unit empty, dry and
frost-free.

9. Technical data

Rated voltage: . . . . . . . . . . . . . . . 18 V
Flow rate . . . . . . . . . . . . . .500 ml/min
Tank capacity . . . . . . . . . . . . . . . 7.5 L
Pressure . . . . . . . . . . . . . . . . .1.5 bar
Weight. . . . . . . . . . . . . . . . . . . 2.3 Kg
Sound pressure level L
Inaccuracy K . . . . . . . . . . . . . . . 3 dB
pA
Sound power level L
Inaccuracy K . . . . . . . . . . . . . . . 3 dB
WA
Hand arm vibration . . . . . . . . 1.407 m/s
Inaccuracy K . . . . . . . . . . . . . .1.5 m/s

10. Waste treatment and recycling

The unit must not be disposed of
with household waste.
Machine has been packed in a packaging
for avoiding transport damage. This
packaging consists of raw materials and
can therefore be reused or returned to the
raw material cycle. Machine and its
accessories consist of different materials,
e.g. metal and plastics. Dispose of defective
parts as hazardous materials. Ask specialist
dealer or municipal authorities for further
details!
. . . . . 55.6 dB(A)
pA
. . . . . . 66.6 dB(A)
WA
2
2