Technical Data; Ec-Declaration Of Conformity - Batavia FLIPOUT BT-TS001 Mode D'emploi

TECHNICAL DATA

Speed . . . . . . . . . . . . . . 0 - 175 min
Sound Pressure Level L
Uncertainty K . . . . . . . . . . . . . . 3 dB
pA
Sound Power Level L
Uncertainty K . . . . . . . . . . . . . . 3 dB
WA
Hand Arm Vibration. . . . . . . . . .<2,5 m/s
Uncertainty K . . . . . . . . . . . . . .1,5m/s
Dimensions . . . . . . . . . 225 x 58 x 34 mm
Weight . . . . . . . . . . . . . . . . . .450 g
Battery
Rated Voltage . . . . . . . . . . . . . 7,2 V
Charging Time . . . . . . . . . . . . . . . 1 h
Charger
Input . . . . . . . . . . 230 V~ 50 Hz, 0,35 A
Output . . . . . . . . . . . . . . . 8,6 V
Protection Class . . . . . . . . . . . . . . . II
DISPOSAL
Do not dispose of electric power tools
with domestic refuse.
The electric power tool is shipped in
packaging to reduce transport damage. This
packaging is a raw material and as such can
either be reused or can
be fed back into the raw material cycle. The
electric power tool and its accessories are
made from various materials such as metals
and plastics. Take defective components to a
special refuse collection point. Ask about these
at your specialist shop or local council. The
product and the user manual may be subject
to changes. Technical data may be changed
without prior notice.
Batteries
Think of the environment when disposing of
batteries. Contact your local authorities to find
out where your nearest disposal area is.
Do not dispose of batteries with domestic
refuse.
Do not dispose of by burning, risk of explosion.
7062267_FlipOut_Ma_#1503-12.indb 15
-1
. . . . . . 50 dB(A)
pA
. . . . . . . 61 dB(A)
WA
700 mAh
⎓
⎓
, 1 A

EC-DECLARATION OF CONFORMITY

We, the Batavia GmbH, Weth. Buitenhuis‑
straat 2a, NL‑7951 SM Staphorst, declare by
our own responsibility that the product
Flip Out, Model BT‑TS001, Item‑No 7062267
is according to the basic requirements, which
2
are defined in the European Directives Electro‑
2
magnetic Compatibility 2004/108/EC;
2014/30/EU (EMC), 2006/42/EC (Machin‑
ery), 2006/95/EG and their amendments. For
the evaluation of conformity, the following
harmonized standards were consulted:
EN 55014‑1,
EN 55014‑2,
EN 60745‑1,
EN 60745‑2‑2,
EN 61000‑3‑2,
EN 61000‑3‑3,
EN 60335‑1;
EN 60335‑2‑29;
EN 62233
Staphorst, 15 February 2015
Meino Seinen, QA Representative
Batavia GmbH, Weth. Buitenhuisstraat 2a,
7951 SM Staphorst, Netherlands
.
English
15
26-03-15 09:11