Residual Risks; Emergency Procedure; General Power Tool Safety Warnings - Güde KS 350 E Traduction Du Mode D'emploi D'origine

sponding training by a professional or the Operating
Instructions. No special training is necessary.
The operator is responsible for accidents or risks to
third parties.
Observe to keep out of dangerous zone

Residual risks

Danger of injury !
Contact with the saw chain can cause casualties.
Never touch moving chain by hands.
Danger of kickback !
Kickback can lead to casualties.
Danger of burns !
Chain and guiding groove warm up in operation.

Emergency procedure

Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. For the sake of eventual
accident, in accordance with DIN 13164, a workplace
has to be fitted with a first-aid kit. It is essential to re-
place any used material in the first-aid kit immediately
after it has been used.
If you seek help, state the following pieces of infor-
mation
1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)
Symbols
Caution!
Read the Operating Instructions!
Before carrying out any work on the machi-
ne, disconnect the plug from the socket.
Cable pulling / transport prohibited.
In case of cable damage or nock, immedi-
ately pull out plug from socket
Warning against dangerous kickback.
Keep distance of persons
Observe to keep out of dangerous zone
Protect against humidity
Never expose tool to rain.
Antivibration system
Rotation direction of the saw chain
Wear protective helmet !
Wear eye protection !
Wear ear protectors!
Wear protective gloves !
Wear safety cut through resistant shoes
with safety sole and steel toe !
Wear protective clothing with cut through
resistant ply !
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
Protect against humidity
This side up

General Power Tool Safety Warnings

Warning
Read all safety warnings and all instructions. Failu-
re to follow the warnings and instructions may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool" in the warnings refers to your
mains-operated (cordepower tool or battery-opera-
ted (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while opera-
ting a power tool. Distractions can cause you to
lose control.
ENGLISH
21