Specified Conditions Of Use; Emergency Procedure; Residual Risks - Güde KS 402 P Traduction Du Mode D'emploi D'origine

KS 401 E | KS 402 P
Read and understand the operating
instructions before using the
appliance. Abide by all the safety
measures stated in the service manual. Act responsib-
ly toward third parties.
In case of any doubts about connection and operation
refer please to our customer center

Specified Conditions Of Use

The electric chain saw is only intended to cut wood
across the grain. Respecting technical data and safety
precautions.
Do not use this product in any other way as stated
for normal use. Not observing general regulations
in force and instructions from this manual does not
make the manufacturer liable for damages.
Operation is only allowed with a safety
switch against stray current (RCD max. stray
current of 30mA).
Requirements for operating staff
The operating staff must carefully read the Opera-
ting Instructions before using the appliance.
Qualification: Apart from the detailed instructions
by a professional, no special qualification is necessary
for appliance using.
minimum age: Persons over 18 years of age can
only work on the appliance. An exception includes
youngsters trained in order to reach knowledge
under supervision of the trainer during occupational
education.
Training: Using the appliance only requires corre-
sponding training by a professional or the Operating
Instructions. No special training is necessary.
The operator is responsible for accidents or risks to
third parties.
Observe to keep out of dangerous zone

Residual risks

Danger of injury !
Contact with the saw chain can cause casualties.
Never touch moving chain by hands.
Danger of kickback !
Kickback can lead to casualties.
Danger of burns !
Chain and guiding groove warm up in operation.

Emergency procedure

Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. For the sake of eventual
accident, in accordance with DIN 13164, a workplace
has to be fitted with a first-aid kit. It is essential to
replace any used material in the first-aid kit immedia-
tely after it has been used.
If you seek help, state the following pieces of infor-
mation:
1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)
Symbols
Caution!
Read the Operating Instructions!
before carrying out any work on the machi-
ne, disconnect the plug from the socket.
Cable pulling / transport prohibited.
In case of cable damage or nock, immedi-
ately pull out plug from socket
warning against dangerous kickback.
Keep distance of persons
Observe to keep out of dangerous zone
Protect against humidity
Never expose tool to rain.
Antivibration system
Rotation direction of the saw chain
wear protective helmet !
wear eye protection !
wear ear protectors!
wear protective gloves !
ENGLISH
21