Electrical Connections - Erreka ARES Manuel De L'installateur

6

ELECTRICAL CONNECTIONS


The ARES operators, along with the recommended
switchboards, allow the implementation of a
slowdown system, with the speed slowing down at
the end of the closing and opening operations.

We recommend using the VIVO-M101(M) switchboard (for single operator installations) and
VIVO-M201(M) (for twin operator installations).
VIVO-M201(M)
P1 P2 P3
ST1
FT1
A1, A2 Operators
C1, C2 Capacitors
DL4 Gate opening
DL5: Gate closing
PUL1 Close mini-pushbutton
PUL2 Open mini-pushbutton
T Earth connection
Turning direction:
• When pressing PUL1 (close), DL5 lights up and the A1 G2-G3 and A2 G5-G6
cable connectors are activated.
• When pressing PUL2 (open), DL4 lights up and the A1 G1-G3 and A2 G4-G6
cable connectors are activated.

If the turning direction is not correct, interchange the cables connected in cable
connectors G1-G2 or G4-G5.
Operators of 125 or 230 Vac
FCA2 COM FCC2 SCA
P4 P5 P6 P15 P14 P16 P7 P8
P11 P12 P22 P23 G7 G8
Courtesy
24Vac
STOP LOCK
ST2 FT2 FCA1 FCC1
Light
A2 operator connections:
G4 Open
G5 Close
G6 Common (COM), grey cable
G4 G5 G6 G1 G2 G3
G9 G10
N L
POWER
Lamp.
MOTOR2 (G2-G1-COM) MOTOR1 (G2-G1-COM)
G4 G5 G6 G1 G2 G3
A1 operator connections:
G1 Open
G2 Close
G3 Common (COM), grey cable
INSTALLATION
VIVO-M201: 230Vac/50Hz
VIVO-M201M: 125Vac/60Hz
P169V
ARES electro-mechanical operator
33