Output Power During High Temperature Condition (Derating) - Agilent Technologies TwisTorr 704FS Mode D'emploi

17 Technical Information

Output Power during High Temperature Condition (derating)

Output Power during High Temperature Condition
(derating)
An enhanced power derating is implemented to provide the following
benefits:



The enhanced power derating dynamically adapts per the following
functioning parameters:




WARNING! The user must set the gas type load (WIN 157) and Cooling mode (WIN 106)
before starting the pump.
If the body temperature exceeds 60 °C, the controller goes in status 6
(Fail).
294/334
Immediate auto-detection of changing requirements in the
application.
Dynamic TMP performance adapting to application conditions for
customer's process stabilization and speeding-up.
Always the best "tuning" for TMP pumping technology taking the
complete advantage of TwisTorr technology potential.
Gas type load (selectable WIN 157: see the "Window Meanings"
paragraph in the relevant controller manual).
Cooling mode (selectable WIN 106: see the "Window Meanings"
paragraph in the relevant controller manual).
Actual pump temperature (can be read by WIN 204: see the
"Window Meanings" paragraph in the relevant controller manual).
Actual Driving Frequency (can be read by WIN 203: see the
"Window Meanings" paragraph in the relevant controller manual).
TwisTorr 704 FS User Manual / 87-901-051-01 (A)